SKF product lines we supply
From the bearing on the shaft to the system that lubricates it — a complete, genuine SKF supply for rotating equipment. Below are the ranges we commonly carry and source.
Designations shown (e.g. 6205-2RS1, 22210 E, HMS5) are examples of the ranges we supply — not a stock list. Tell us your application or part number and we'll confirm the exact match, interchange, and current availability.
01 — Bearings & housed units
Bearings & housed units
Single- and double-row ball and roller bearings — plus ready-to-mount Y-bearing units, plummer block housings, and food-line units — in metric and inch ranges, selected to your load, speed, and temperature.
The workhorse for electric motors, pumps, and fans. Open, shielded (2Z), or sealed (2RS1) — e.g. 6205-2RS1, 6308.
Two rows on a common sphered raceway; tolerate shaft misalignment and deflection in long or compliant shafts.
Carry combined radial and axial loads; single, double-row, and matched sets for spindles and pumps.
High radial capacity for heavy, high-speed duty; separable designs ease mounting and dismounting.
Self-aligning, very high load capacity for vibrating screens, gearboxes, and crushers — e.g. 22210 E, 22315 EK.
Combined loads in one direction; single row and matched arrangements for wheel-ends and gear drives.
Ready-to-mount insert bearings with cast-iron or pressed-steel housings for conveyors and ag equipment.
Split housings for larger shafts — take spherical roller or self-aligning bearings with seals and accessories.
Corrosion-resistant, wash-down-duty units for food, beverage, and hygienic process lines.
02 — Seals
Seals that keep lubricant in, contaminants out
Shaft and exclusion seals to protect the bearing arrangement and extend service life across a range of compounds and temperatures.
Spring-loaded lip seals (CR Seals) in nitrile, FKM, and other compounds to retain lubricant and exclude dirt.
All-rubber axial seals that rotate with the shaft — secondary protection against dust, splash, and slurry.
Heavy-duty exclusion seals for very dirty, wet environments such as screens and pillow-block ends.
Restore a worn shaft counterface in minutes — no machining — to give a new seal a proper running surface.
03 — Lubrication & greases
Lubricants & greases
The right grease for the temperature and duty — plus the pumps and fittings to apply it cleanly and keep contamination out.
Premium polyurea grease for electric motors and high-temperature bearings, with long life.
Low-friction grease for high speeds and very low temperatures — instruments and small motors.
Greases for automotive wheel-end, hub, and chassis points in the aftermarket.
Fill single-point lubricators and grease guns cleanly, without introducing contamination.
Colour-coded caps and tags that keep grease nipples clean and identify the correct lubricant.
04 — Power transmission
Power transmission components
Connect, drive, and protect rotating equipment — matched to load, speed, and alignment for a reliable drive train.
V-belts, wedge belts, and synchronous timing belts with matching sheaves and pulleys.
Roller chain for conveyors and heavy drives where belts won't do.
Flexible couplings that accommodate misalignment and dampen shock between driver and driven shaft.
Sprockets matched to chain pitch and shaft bore for accurate, long-wearing drives.
05 — Maintenance & hydraulic tools
Maintenance & hydraulic tools
Fit and remove bearings correctly — most premature failures trace back to mounting damage at install. Hydraulic and mechanical tools do it safely.
Self-centring hydraulic pullers for safe, high-force dismounting without damaging the shaft.
High-pressure pumps (up to 50 MPa) that drive pullers and the oil-injection method.
Pumps for hydraulic lifting and positioning tasks around the maintenance bay.
Versatile mechanical puller for bearings, gears, and pulleys with self-locking arms.
SKF puller set for controlled, damage-free removal of small to medium bearings.
Have a part number, or a problem to solve?
Send us SKF designations or describe the application and operating conditions. We'll cross-reference, confirm authenticity and availability, and come back with a clear quote — usually within one business day.